Hanging out in my toolshed fixing my bike, had replaced the axle and freehub on my rear wheel. So I have to remove the cassette and the hub and have a look inside. Afterwards a quick escape to the forest on the singletrack if I can find it under the leaves. Chapters: 00:00 Intro 00:45 What’s going on 02:27 Remove Wheel 02:55 Freehub & Casssette disassembly 06:45 A look inside the hub 07:08 Baby Wipes 08:00 Comparing parts 11:00 Reassembly 12:45 Freehub assembly pro tip 15:00 Cassette Assembly 18:15 SKS bikepump rant 19:35 Mounting Wheel 20:35 Testing the repair 21:16
Going through a selection of spare parts for pinball machines, since we have to #stayhome why not have a look at them #withme. It’s mostly for Bally/Midway Williams machines but there’s some generic stuff included. So if you feel like hanging out, welcome. Now let’s look at some awesome #pinball stuff.
In this video I replace a #906 incandescent used as flashers in old pinball machines with a LED. Action Packed. —— Main Channel: https://www.youtube.com/ruddk Secondary channel : https://www.youtube.com/channel/UCKq_sn1DMx6jjYPnGtk2xJw Instagram: @martinRudJ Twitter: @wwwruddk Website: https://www.rud.dk/
In this rather long video I talk about some of the technical things that end up dealing with and fixing when you own an old pinball machine. It can serve as inspiration or a warning, if you are thinking about buying a machine for yourself. 🙂 The other video I talked about: https://www.youtube.com/watch?v=D3I_J29O39M —— Main Channel: https://www.youtube.com/ruddk Secondary channel : https://www.youtube.com/channel/UCKq_sn1DMx6jjYPnGtk2xJw Instagram: @martinRudJ Twitter: @wwwruddk Website: https://www.rud.dk/
In this part 2, I get the spare parts and I attempt to replace the transistor that drives the flasher bulbs on top of the back box. Until now, the repairs I have performed on pinball machines have only been mechanical. Check out part 1 where I diagnose the problem: https://www.youtube.com/watch?v=D3I_J29O39M