Site Overlay

Tag: electronics

View Hanging-out.-Live-from-the-workshop

Hanging out. Live from the workshop

Just hanging out in my workshop, doing a bit of bike maintenance and perhaps a bit of electronics lightning works in a treasure chest if I get the parts. I will probably be testing a different streaming setup, it might all to horribly wrong.

View Pinball-Modding-Putting-a-spotlight-on-the-gumball-machine

Pinball Modding – Putting a spotlight on the gumball machine

So it is finally time to add some more light on the gumball machine on the Twilight Zone pinball machine. If you found this interesting, you should really check out @Joe’s Classic Video Games Chapters: 00:00 Intro 00:22 Getting started 04:00 Wires on socket 07:14 First test of light 13:55 Testing LED instead 15:29 Opening up pinball machine 20:45 Mounting the light 25:14 Removing mini playfield 35:05 Installing the wires 37:02 Finding power 41:00 Testing the result 44:04 Saying goodbye

View Converting-the-LED-sign-to-use-USB-power

Converting the LED sign to use USB power

So this is a continuation of my first video about this small LED text sign. Today I am just converting it to accept USB power, because who doesn’t have a spare USB power supply. Chapters: 00:00 Intro 00:30 Minimum acceptable voltage 02:06 Why your phone charge slowly 04:00 Sacrificing the USB cable 08:30 Salvaging the 12 volt connector 11:18 Soldering the cables together 19:50 heat shrink tubing shrunk 20:56 Will it work?

View Cheap-Remote-Controlled-Switch-for-DIY-project-6-15

Cheap Remote Controlled Switch for DIY project $6-$15

I have purchased a remote controlled switch, running on 12v, capable of switching up to 250v(if you dare). It has 5 remotes included. Maybe for a Halloween project or something else. It is simple, easy to use and cheap. I’m no @bigclivedotcom and this isn’t my usual format so bear with me. 😀 So this is a rather long video so here’s some chapters in case you are in a hurry.: 00:00 Introduction 00:18 Unboxing 03:00 Lack of high voltage seperation 03:36 Connecting wires 07:00 Power up and configuration 09:08 Connecting a LED for testing 16:44 Let there be lightContinue readingCheap Remote Controlled Switch for DIY project $6-$15

View Going-through-my-pinball-spare-parts

Going through my pinball spare parts

Going through a selection of spare parts for pinball machines, since we have to #stayhome why not have a look at them #withme. It’s mostly for Bally/Midway Williams machines but there’s some generic stuff included. So if you feel like hanging out, welcome. Now let’s look at some awesome #pinball stuff.